More DLP v2.0 Boards

After a long pause, the control board for the DLP VCO got printed, along with the top and bottom boards for the midi2cv unit. Now just need to wait for some back ordered blank panels and will be able to finish these two eurorack modules.

Dual VCO Module

Midi2CV/Trigger Module:

All the designs, schematics, and firmware code here: https://github.com/danielhood/dlp

DLP v2.0 Boards Alive!

I've started migrating the DLP modules to eurorack format - v2.0! First is the oscillator, two voices on one 8hp board; the knobs will likely live on a 10hp panel.

The boards came back this week, and I finally had a chance to wire one up and verify that it's alive.

Audio on SoundCloud, project info and schems on gitHub.

The Eurorack Saga Begins

After actively trying to avoid going down the rabbit hole, the igloo has finally acquired it's first 19" of Eurorack rails starting with one of the most basic of sound modules, TipTop's lovely BD909 (and Intellijel's Audio Interface II for quiet i/o) This certainly isn't the end of the DIY circuits, as all the Lil'Penguin circuits will likely get a Eurorack makeover. There will also be many other notable and destructive modules as the Eurorack universe is rich with awesomeness, HexInverter.net and MakeNoise being quite noteworthy.

BlizzardTracks.com and CalibratedRecords.net have been updated with a simple new design.

Aslo, we have made several tracks from the back catalogue of each available on Blizzard and Calibrated's SoundCloud accounts. Enjoy!

Techno jam from earlier this week with André et Michèle.
[Mp3]
[mixcloud]

Cleaned the studio. Time for a couple pics:

DLP Kick Module

A 909ish kick module (yes, the one started at the end of 2013) is alive and in a separate box for now:
A audio sample set featuring some overdriven, filtered, and sligtly fx'd kicks: kick_module_test_1.mp3. All audio right off the kit, no post-processing.